DediProg
SPI Flash Programming Solution
SF100 ISP IC Programmer
The SF100 is a high speed "In System Programming" programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.
SF600 SPI Flash IC Programmer
The SF600 is a high speed "in System Programming" programmer to update the SPI Flash soldered on board (In-Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.
SF600 combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.
SF600 Plus SPI Flash IC Programmer
SF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.
SF600Plus combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds an 8GB memory, which allows standalone programming.
SF700 SPI NOR/SPI NAND Engineering Programmer
SF700 is an ALL new designed SPI Flash engineering programmer, which supports all SPI NOR Flash and SPI NAND Flash in the market.
SF700 continues to provide strong engineering mode and command line as SF600, DediProg's another programmer, to satisfy the demand for R&D. Apart from the engineering application, SF700 also supports project file for small volume production demand. SF700 can do programming in parallel with multiple programmers or standalone mode.
EM100Pro-G2 SPI Flash Emulator
EM100Pro-G2 is DediProg SPI NOR Flash emulator integrated high-speed DRAM memory to offer the best code updating performances. This advanced tool has been designed in close cooperation with the SPI NOR Flash suppliers to emulator the behavior of all the SPI NOR Flash on the market and also the next generation SPI NOR Flash.
It provides engineers with a flexible development and testing tool for any embedded project that uses an external SPI NOR Flash. It provides quick, in-circuit firmware test cycles during development.
SF100 ISP Evaluation Kit
Update your SPI Flash soldered on your application board by using our dedicated programmers: SF100 and SF100+. When connected to the application board, the SF100 programmer can control the SPI bus to read or update the Serial Flash content in a very short time.
SPI Flash Development Kit (SF100)
SPI Flash Development kit gives engineers the total solution while working on firmware development based on the SPI flash memories. This kit combines all the accessories of EM100Pro-G2 and SF100 and gives the users greater price advantages than purchasing separately. For more information, please visit SF100 and EM100Pro-G2 product page.
SPI Flash Development Kit (SF600)
SPI Flash Development kit gives engineers the total solution while working on firmware development based on the SPI flash memories. This kit combines all the accessories of EM100Pro-G2 and SF600 and gives the users greater price advantages than purchasing separately. For more information, please visit SF600 and EM100Pro-G2 product page...
eMMC & UFS Programming Solution
NuProg-E2 Engineering Universal Programmer
NuProg-E2 is an universal engineering programmer. Widely supports most IC types on the market, UFS, eMMC, MCU, CPLD, FPGA, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND and EEPROM, etc. And also support different types of IC packages: CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc. Designed FPGA kernel architecture supplies ultra high speed programming performance. The Programming project and sockets are compatible with NuProgPlus. Together with built-in SuperSpeed® USB 3.0 for high-speed communication, it is an efficient tool for you to focus on application analysis and product development.
NuProgPlus-U8 Universal Gang Programmer and Duplicator
NuProgPlus Series is the powerful universal programmer which is capable to support EEPROM, Flash, MCU, eMMC, UFS, PCI-E SSD, and CANbus devices programming. It can also support PCI-E, eMMC and UFS device duplicating. With the all newly designed FPGA kernel architecture, NuProgPlus Series can support 16 SPI Flash programming or 16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U8 is the manual operation model of NuProgPlus Series. With the project file(s), the user can use the LCD and keypad to operate the programming or duplicating without PC. It supports Hand Press Fixture (Option) to help the user to pick and place the IC easily.
NuProgPlus-U16 Universal Gang Programmer and Duplicator
NuProgPlus Series is the powerful universal programmer which is capable of supporting EEPROM, Flash, MCU, eMMC, UFS, PCI-E SSD, and CANbus devices programming. It can also support PCI-E, eMMC and UFS device duplicating. With the all newly designed FPGA kernel architecture, total sockets can be extended up to 16 SPI Flash programming or 16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U16 is the manual operation model of NuProgPlus Series. With the project file(s), the user can use the LCD and keypad to operate the programming or duplicating without PC. Hand Press Fixture is an option accessory to help the user pick and place the IC easily.
Flash Series IC Programmer
StarProg-F Engineering Programmer
StarProg-F is an engineering FLASH IC programmer supports a variety of FLASH IC on the market, like EEPROM, SPI NOR/NAND FLASH, Parallel NOR/NAND Flash, eMMC/eMCP, etc. Powered by USB port and does not need external power.
StarProg-F provides users Command Line for software redevelopment. Palm size and space saving. Whether engineering development or low volume production, StarProg-F offers user the best solution. This programmer programs the IC through DediProg designed socket adaptors.
K110 Engineering Programmer
K110 is an engineering IC programmer that supports the majority Flash ICs on the market. Powered by USB port and does not need external power, also provides Command Line for software redevelopment. Palm-size and space saving. It provides online or offline Flash IC programming through the different adaptor.
K110 offers user the best solution for development and low volume production.
Universal IC Programmer
NuProgPlus-U16 Universal Gang Programmer and Duplicator
NuProgPlus Series is the powerful universal programmer which is capable of supporting EEPROM, Flash, MCU, eMMC, UFS, PCI-E SSD, and CANbus devices programming. It can also support PCI-E, eMMC and UFS device duplicating. With the all newly designed FPGA kernel architecture, total sockets can be extended up to 16 SPI Flash programming or 16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U16 is the manual operation model of NuProgPlus Series. With the project file(s), the user can use the LCD and keypad to operate the programming or duplicating without PC. Hand Press Fixture is an option accessory to help the user pick and place the IC easily.
ProgMaster-U8 Gang Programmer(8 Sites)
ProgMaster-U8 is a gang programmer with ultra high speed, which supports all IC families on the market. Equipped with 8 programming sites with an LCD keypad that allows stand-alone function. ProgMaster-U8 has been designed and optimized to reach IC maximum performances without compromise on the programming quality, stability, and reliability and making it the best value for mass production.
ProgMaster-U8 Gang Programmer(8 Sites)
ProgMaster-U8 is a gang programmer with ultra high speed, which supports all IC families on the market. Equipped with 8 programming sites with an LCD keypad that allows stand-alone function. ProgMaster-U8 has been designed and optimized to reach IC maximum performances without compromise on the programming quality, stability, and reliability and making it the best value for mass production.
StarProg-A Universal On Board (ICP/ISP) Programmer
StarProg-A supports MCU, CPLD, SPI NOR Flash, SPI NAND Flash, and EEPROM on board programming (ICP/ISP). It is optimized for the integration of automated machines and can be easily used in development and mass production
Starprog-U Engineering Programmer
StarProg-U is an engineering universal IC programmer which supports a variety of IC on the market, like EEPROM, SPI NOR/NAND FLASH, Parallel NOR/NAND Flash, eMMC/eMCP, Microcontroller (MCU), etc. Powered by USB port and does not need external power. StarProg-U provides users Command Line for software redevelopment. Palm size and space saving. Whether engineering development or low volume production, StarProg-U offers you the best solution. This programmer programs IC through DediProg designed socket adaptors.
