Latest News

Lauterbach Announces Full Real-Time Trace Support in TRACE32®

For Wind River® HelixTM Virtualization Platform

19th August, 2019

Lauterbach, the leading manufacturer of micro- processor development tools, announced that their real-time tracing solutions in TRACE32 now support the Wind River® Helix™ Virtualization Platform (Helix Platform). Helix Platform is Wind River‘s new edge compute software platform that runs multiple operating systems and consolidates mixed-criticality applications in a single platform, simplifying, securing, and futureproofing designs for the aerospace, automotive, defense, industrial, and medical markets. TRACE32 supports tracing the full program flow of such heterogeneous systems in real-time, without impact on the run-time behavior. The traced data is then analyzed in terms of timing behavior and code coverage. The support is available for ARMv8 architectures, currently released for Renesas R-Car H3, R-Car M3 and Xilinx Zynq Ultrascale+.

For more information contact:

Phone: 080-6764 8888
Email: trace32sales@esaindia.com
Press Release: TRACE32® Support

TRACE32 Provides JTAG Debug Support for RISC-V Linux

16th August, 2019

Lauterbach, a Silver Member of the RISC-V Foundation, is proud to announce full JTAG debug support for Linux running on systems based on the RISC-V Open Source ISA. The Linux kernel awareness integrates with the TRACE32 debugger providing users with a seamless debug experience across the entire system life cycle, from board bring up to task level debugging. This allows for a single tool to be used in all phases of system development and can reduce training and development times and costs for engineers who are already under time pressures to deliver top quality embedded devices.

For more information contact:

Phone: 080-6764 8888
Email: trace32sales@esaindia.com

On expansion course: Axivion targets India and Southeast Asia with its new partner ESA Group

16th July, 2019

As of May 2019, Axivion, provider of innovative software solutions for static code analysis and protection against software erosion, has been heightened its presence in India and Southeast Asia with the new partnership with ESA Group: The new partner Electro Systems Associates (ESA) with its group companies in Bangalore and Singapore takes over the regional distribution of the Axivion Bauhaus Suite and other Axivion solutions. In fact, Axivion also offers customer specific technical support and training for its development tools on site via its well-networked partner.

In India, Axivion is represented in the market by Embedded Systems Solutions (ESS), an ESA Group company based in Bangalore. Gopalam Embedded Systems (GES), headquartered in Singapore and also part of the Group, covers the sales and support for the ASEAN countries, including Singapore and Malyasia. Axivion benefits from the decade-long network of ESA, ESS and GES, who provide embedded designers in India and Southeast Asia with a complete ecosystem of tools for the development and debugging of embedded systems.

For more information contact:

Phone: 080-6764 8835/36
Email: axivionsales@embeddedindia.com

emNet – The New Name for embOS/IP, SEGGER's Proven Network Software

emNet (known as embOS/IP) has proven its value over the years in many customer products and in our own products such as J-Link PRO, Flasher PRO, Flasher ATE, Flasher Secure, Flasher ARM and Flasher 5 PRO.





emNet is more than an IP stack, it is a complete and modern networking stack to meet the requirements of all network related applications including the Internet of Things.

emNet works best with an RTOS. Naturally SEGGER recommends the use of embOS, but if for any reason the customer uses a different RTOS, he still can use emNet. The old name embOS/IP indicated, that embOS was a requirement, which was not the case.

For more information contact:

Phone: 080-6764 8835/36
Email: seggersales@embeddedindia.com

Arm Compiler 6.12: Bringing in security and improved performance

lntroducing Arm Compiler 6.12 which is now available to evaluate or download as part of the below integrated toolkits:

  • Arm Development Studio 2019.0
  • Keil MDK version 5.27

Outstanding performance

As always, Arm is constantly investing to improve our optimizations and overall performance across all workloads.

Arm Compiler 6.12 delivers the highest-ever CoreMark score of 4.02 CoreMarks/MHz on a Cortex-M33. It also delivers significant improvement for range of specific workloads such as the CMSIS-DSP and CMSIS-NN software libraries.

SerialTek Introduces Advanced PCIe® and NVMe™ Gen4 Interposers for AIC, M.2, U.2 and U.3 



May 5, 2019

SerialTek SerialTek, a leading provider of protocol test solutions for PCI Express® (PCIe), NVM Express® (NVMe), Serial Attached SCSI (SAS), and Serial ATA (SATA), today introduced a major advancement in the PCIe/NVMe test and analysis market with the debut of its SI-Fi line of interposers. Coupled with the recently announced Kodiak™ PCIe/NVMe Gen4 Analysis System, SerialTek’s SI-Fi interposers uniquely solve complex issues relating to signal quality and system transparency, and eliminate the need for cumbersome, time-intensive calibration and tuning routines. Interposers are specially designed test adapters, or probes, that are electrically and physically placed between components of a communications system to intercept and relay high-speed signaling and discrete data lines for analysis purposes.

Multiple Form Factor Support:

SI-Fi interposer form factors include AIC (x4), M.2 (x4), U.2 (x4), and U.3 (x4). Additionally, U.2, U.3, single-port (1x4), and dual-port (2x2) analysis can be combined into one interposer unit, providing significant cost savings in enterprise environments where all form factors are required. SI-Fi interposers also support all relevant sidebands, including SMBus (e.g., NVMe-MI) from the host or from external / third-party injection or generation tools.

No Need for Calibration. Kodiak Platform Complements SI-Fi Technology with an Advanced Processing Architecture

For more information contact:

Phone: 080-6764 8835/36
Email: serialteksales@esaindia.com

2 May, 2019

Lauterbach, the leading manufacturer of microprocessor development tools, announced the support of Wind River® HelixTM Virtualization Platform (Helix Platform) with its TRACE32 JTAG debug tools. Helix Platform is Wind River‘s new edge compute software foundation that runs multiple operating systems and consolidates mixed-criticality applications in a single platform, simplifying, securing, and future-proofing designs for the aerospace, automotive, defense, industrial, and medical markets. TRACE32 supports JTAG-debugging of such heterogeneous systems, giving access to all guests at the same time. The support is available for ARMv8 architectures, currently released for Renesas R-Car H3, R-Car M3 and Xilinx Zynq Ultrascale+.

For more information contact:

Phone: 080-6764 8888
Email: trace32sales@esaindia.com
Press Release: TRACE32® Support

Lauterbach announces SAFERTOS® awareness from TRACE32®

4 April, 2019

Lauterbach announces SAFERTOS® awareness from TRACE32®

Lauterbach, the leading manufacturer of microprocessor development tools, has announced that they have extended the kernel awareness for SAFERTOS from WITTENSTEIN high integrity systems on all Arm® processors. The new SAFERTOS awareness provides easy access to task lists and other kernel information, generates performance analysis data and enables customers to carry out effective debugging with the TRACE32 systems on targets running SAFERTOS. SAFERTOS is a pre-emptive, safety critical Real Time Operating System (RTOS) available precertified to IEC 61508 SIL3 and ISO 26262 ASIL D. SAFERTOS is used internationally across a range of safety critical applications and is renowned for its high quality, delivering unprecedented levels of determinism and robustness to embedded systems whilst using minimal resources.

The new software package from Lauterbach contains a ready-to run configuration for the SAFERTOS Real Time Kernel. The SAFERTOS awareness for TRACE32 allows the developer to display all SAFERTOS system resources including task information, dynamic thread performance measurement, and SAFERTOS specific display of trace listing, as well as statistic evaluation and graphic display of task and function run times, PRACTICE functions for OS Data, and SAFERTOS related Pull-Down Menu.

All features of the TRACE32 awareness for SAFERTOS do not require any additional target configuration or any hooks or patches within the OS itself. The philosophy of TRACE32 is for the application to behave exactly the same in the debug environment as on the final product; only this way can 100% certainty of testing be achieved.

For more information contact:

Phone: 080-6764 8888
Email: trace32sales@esaindia.com

New Testing Tools For Gen4 PCIe Devices

We’ve added two new modules to our range of products for testing Gen4 PCIe devices. The Gen4 PCIe U.2 and Gen4 PCIe U.3 modules provide fully automated hot-swap and physical layer fault injection for drives using the latest U.2 and U.3 specifications. Both modules are available with external triggering IN/OUT allowing you to sync with external test equipment.

SerialTek introduces Groundbreaking GEN4 PCIE® and NVME™ Analysis System NEW! KodiakTM PCIe Gen4 Analysis System





New Kodiak™ Platform Addresses Evolving Computing and Data Storage Advancements

March 5, 2019

SerialTek introduced a major advancement in the PCIe/NVMe test and analysis market with the debut of its Kodiak PCIe/NVMe Analysis System coupled with the field-proven BusXpert™ analysis software.

The Kodiak platform includes a Modern Processing Acceleration Architecture to Address Advances in I/O. Interface responsiveness is markedly advanced, searches involving massive amounts of data are fast, and hardware filtering is flexible and powerful.

Dual 10GbE SFP+ ports are available to offload traces to a host computer or network directory at speeds up to 20Gbps. A 10GbE port is provided for network-based trace storage and retrieval. Local storage choices include USB 3.1 and PCI Express OCuLink.

Kodiak Brings Forward Popular SerialTek Advantages

These include Real-Time Protocol Processor™, a proprietary processing architecture for dynamic PCIe and NVMe protocol information that enables accurate triggers and analysis, even in the most difficult cases, and calibration-free interposers, enabled by SerialTek’s proprietary SI-Fi™ technology, which can save hours over legacy approaches requiring calibration.

For more information contact:

Phone: 080-6764 8835/36
Email: serialteksales@esaindia.com

Start using the New ARM DEVELOPMENT STUDIO!

Time limited trade-in offer for current DS-5 and Keil-MDK customers

DS-5 and MDK customers may be entitled to trade in (between Dec 1st 2018 and June 31st 2019) their existing licenses when purchasing the brand new ARM Development Studio.

During the promotion period, qualifying customers will receive a discount equivalent to the remaining value of their existing products or even get free-of-charge licenses for Arm’s new toolchain.

Get in touch with us immediately (armtoolssales@embeddedindia.com or 9845005268) to find out how easy it is to move to ARM Development Studio, the most comprehensive embedded tool suite for Arm processors.

Introducing the Brand New Arm Development Studio

Create highly efficient embedded software faster: meet Arm Development Studio

Arm Development Studio addresses developers’ complex challenges from system design to software development by providing a comprehensive tool suite of compiler, debuggers, performance analyzer, graphics development tools and virtual platform.

This new embedded C/C++ development tool suite combines the best of Arm and Keil tools, including the choice of two IDEs, for projects with Cortex-A, Cortex-R and Cortex-M processors ranging from smartcards to autonomous vehicles.

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses

PCAN-MiniDiag FD
Quick CAN bus diagnosis from one hand

February 06, 2019 

The German company PEAK-System has published the handheld device PCAN-MiniDiag FD for the basic diagnosis and fast checking of CAN and CAN FD buses. The battery-powered device has functions which show, for example, the termination, bus load, message and error counters as well as the levels at the CAN connection. In particular, for the first time, users can access any CAN network in a matter of seconds with the innovative transmission rate detection. More precisely, bit timing measurements are used to determine the nominal bit rate for CAN and the data bit rate for CAN FD.

The PCAN-MiniDiag FD can easily be operated with one hand due to its compact size and fits into any conventional trouser or jacket pocket. The device is suitable for service technicians and developers who want to quickly access unknown CAN networks in vehicles, machines, or industrial facilities and perform simple diagnostics. The PCAN-MiniDiag FD has a D-Sub connector, an OLED display, a membrane keyboard with four keys, and a housing with increased IP42 ingress protection.

Vector and Lauterbach Present a Development Solution for Software Debugging over the XCP Protocol



Vector and Lauterbach Present a Development Solution for Software Debugging over the XCP Protocol Stuttgart/Höhenkirchen-Siegertsbrunn, Vector and Lauterbach are offering an integrated solution for ECU software development based on the new ASAM standard “Software Debugging over XCP”. It eliminates the need to repeatedly switch between hardware for measurement, calibration, and debugging.

Aukua delivers 3-in-1 Automotive Ethernet testing solution!

Aukua Systems 3-in-1 Automotive Ethernet testing solution delivers three powerful tools in one platform!
Network Impairment Emulation: see how delay, impairments and bandwidth affect automotive systems, applications and security
Inline Packet Capture and Protocol Analyzer: capture packets, monitor traffic in real-time, and troubleshoot hard to find problems
Traffic Generator: verify system integrity, throughput performance and measure system latency

Aukua is working to help Automotive semiconductor companies, Tier 1 suppliers and OEM Manufacturers leverage Automotive Ethernet so they can rapidly innovate with confidence and deliver new in-vehicle services and infortainment features, while improving safety with new advanced driver assistance systems (ADAS).

TRACE32 certified for ISO 26262 code coverage



Lauterbach are pleased to announce that the TRACE32 Tool Qualification Support-Kit (TQSK) has been certified by TÜV NORD to ISO 26262:2011 for developing systems up to and including ASIL D, the highest level. With deeply embedded software playing a more significant role in our everyday lives it becomes more important that this software is developed well and is able to function as intended even in unforeseen circumstances. To this end numerous software safety standards have been developed for industries which where software failure will cause injury or loss of life: automotive, medical, avionics, etc. In many jurisdictions, compliance to these standards is mandated.

TRACE32 provides JTAG Debug Support for VxWorks 653



Lauterbach is proud to announce full JTAG debug support for VxWorks 653 Multi-core Edition, an ARINC 653-conformant platform from Wind River, including the latest release, VxWorks 653 Multi-core Edition 4.0, supporting Arm, Intel, and Power multi-core processors.

As a Gold Partner of Wind River, Lauterbach has committed itself to support Wind River’s operating systems as soon as they become generally available. To this end, working in close cooperation with Wind River, Lauterbach extended its product TRACE32 to include a comprehensive debug environment tailored to VxWorks 653 systems.

Sealevel eI/O Ethernet & PoE I/O Modules



eI/O digital and analog I/O modules are cost-effective and allow remote monitoring of I/O from anywhere on your Ethernet network. I/O options include optically isolated and dry contact inputs; Reed, Form C and solid-state relays; and analog inputs. Choose from DC and Power over Ethernet (802.3af) versions.

SANBlaze Technology, Inc. announced that it successfully demonstrated NVMe target emulation over RoCE and Fibre Channel at the University of New Hampshire’s first ever plug fest for NVMe-oF™ (NVMe over Fabrics).

The NVMe-oF Plug Fest was held during, June 18-22 2018, at the UNH-IOL facility in Durham, NH USA. Attendees were able to see real-world testing of NVMe over RoCE and NVMe over Fibre Channel on both initiators and targets using SANBlaze’s testing platform.

"SANBlaze tools give users the ability to test NVMe over the full range of transport options, from NVMe over Fibre Channel, to NVMe over Ethernet with RDMA based on both RoCE and iWARP,” said Vince Asbridge, President of SANBlaze Technology.  “The SANBlaze emulation system for NVMe will validate the capability of a SAN or network infrastructure to carry NVMe traffic alongside FCP and Ethernet traffic, and verify the compatibility of NVMe with your existing equipment.”

The SANBlaze NVMe platform not only helps customers test NVMe in their current environment, but also helps in the selection of which protocol or transport to choose.

For more information and demo of SANBlaze products, write to:
Email: sanblazesales@esaindia.com
Phone: 080-6764 8888 (Extn. 35/36)

USB adapter for LIN with master/slave functionality

May 31, 2018 

PEAK-System launched a compact USB adapter called PLIN-USB for connecting a computer to a LIN network. The LIN adapter is intended for service technicians for diagnosis of LIN buses and for developers of vehicle networks. The adapter supports the LIN protocol according to ISO 17987 and meets all LIN specifications up to version 2.2. The LIN interface can be used in master or slave mode.

Please contact pcantool@embeddedindia.com

Aukua's MGA2510 is the first and only traffic generator to support Energy Efficient Ethernet (EEE) or IEEE 802.3az operation!

May, 2018 

It is now possible to validate EEE operations, characterize latency and throughput performance and inject impairments for negative and functional testing all directly over a EEE enabled link.

This new feature is supported for 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T.

Please contact aukuasales@esaindia.com or call +91-9886080011 to schedule a demo today!

Uwe Wilhelm, CEO of Peak-System at Embedded World 2018 - PEAK-System PCAN-PCI/104-Express FD Four Channel

May, 2018 


WIZnet IOT CONTEST

March 16, 2018 - June 30, 2018 

For Registration Visit: www.hackster.io/contests/wiznet

Serial to Ethernet, StablE" is an international project contest for developers worldwide, powered by WIZnet. This contest gives developers an opportunity to showcase their skills in IoT innovation and competency.

We invite all contestants to explore WIZnet's new serial to Ethernet device, WIZ750SR. Any idea or project submission based on WIZ750SR will be accepted, because every project will enhance the functions of WIZ750SR and empower its usefulness.

For contestants, WIZnet provides the standard firmware which supports configuration of the device by Ethernet and data exchange between serial and Ethernet under plenty of options. Contestants had better use the basic software framework and add only their idea on it. Of course, they can design their own complete code from the beginning just using WIZ750SR as a HW platform. It is recommended to use any kind of sensors, actuators or any other devices additionally to differentiate your project from others.

Submit your ideas during the first phase of the contest, May 16 ~ April 20, for a chance to win a free WIZ750SR board to build your project and win cash prizes!

For Registration Visit: www.hackster.io/contests/wiznet

For More Information about the contest, write to:

Email: sales@embeddedindia.com
Phone: 080-6764 8888
Website: www.embeddedindia.com; www.esaindia.com

Tesla owners are required to have the PCAN-USB adapter and Tesla’s Event Data Recorder (EDR) Retrieval Program to generate a PDF report outlining the findings from their electric cars’ data recorder.

Tesla is now allowing owners of its vehicles to access their cars’ Event Data Recorder (EDR), commonly known as the ‘black box’ of autos, through a set of licensed tools and software.

As noted by Tesla on its official help page for its EDR user guide, all of the company’s vehicles save for the original Roadster are equipped with an Event Data Recorder. The recording devices are only activated once the vehicle senses a non-trivial physical occurrence in the vehicle. Thus, during normal driving conditions, the EDR is deactivated.

In the event that data logs from the EDR need to be accessed, however, Tesla’s new set of proprietary tools and software can retrieve data from the vehicle’s black box. The following hardware is required to gain access to the data to the Model S, X, and 3’s EDR.

  • A Windows computer (Mac OSX and Linux are not supported)
  • A PCAN-USB, which is a USB-to-CAN adapter manufactured by Peak System
  • The appropriate Tesla Model S, X, or 3 cable from the EDR Retrieval Hardware Kit

THREE DAY WORKSHOP ON “ARM CORTEX M3”
26th -28th Dec 2017Organized by:

Department of Electronics & Communication Engineering & Department of Telecommunication Engineering Geetha Shishu Shikshana Sangha (R)

GSSS INSTITUTE OF ENGINEERING & TECHNOLOGY FOR WOMEN
Mysuru-570016
In Association with:

Electro Systems Associates Pvt Ltd.

Departments of Electronics & Communication Engineering and Telecommunication Engineering, GSSS Institute of Engineering and Technology for Women is organizing three day workshop on “ARM cortex M3 ”, from 26th December to 28th December 2017 for the Faculty Members of ECE, TCE, EEE, EIE, CSE & ISE Departments of engineering colleges.

Electro Systems Associates Pvt Ltd.(ESA), Bangalore is supporting the event by conducting the technical sessions. Chief Guest and Keynote addresses will be delivered by Mr. Bhooshan Iyer, Vice President, ESA and the Technical Sessions will be conducted by Mrs. Geetha S Nazre, Manager-Technical, ESA Bangalore as resource person.

For More Information about KEIL, ARM Development Tools and for conducting such Faculty Development Program (FDP), Workshops and Training Programs in Engineering Institutions, write to:

Email: armtoolssales@embeddedindia.com
Phone: 080-6764 8888
www.esaindia.com; www.esaindia.com

ESA Partners with AUKUA SYSTEMS

September, 2017

Electro Systems Associates (ESA), a leading provider of protocol solutions and embedded development tools in India, is pleased to announce its partnership with Aukua Systems, Inc. ESA will be Aukua’s channel partner in India focusing on the customers requiring Multigigabit Ethernet testing solutions.

SANBlaze Participates in First End-to-End NVMe over Fibre Channel Evaluation Solution at FMS 2017

August 8, 2017

SANBlaze Technology is being featured at the Industry’s first End-to-End NVMe over Fibre Channel Evaluation Solution at Flash Memory Summit 2017. This innovative solution will enable the acceleration of FC-NVMe evaluations with proven multi-vendor interoperability.

SANBlaze, Broadcom, Cavium, Cisco, NetApp, and Brocade are presenting the first ever demo of an NVMe over Fibre Channel end-to-end solution, comprised of Emulex Gen 6 Fibre Channel HBAs by Broadcom and a Gen 6 Fibre Channel switch by Brocade connected to an all-flash array by NetApp, with SANBlaze VirtuaLUN™ software providing emulation and validation.

Benefits of ESA University Program and Karnataka Education Funding primer

June 2017

A ½ day seminar was conducted at Sir MVIT Engineering College, Bangalore in June 2017 by ESA. The Seminar was presided by the principal of Sir MVIT Dr. Kini and attended by a group of 45 faculty members. Mr. Bhooshan Iyer, Vice President- Business Development and Mr. Sriram Sogal, ESA University Program Representative from Electro Systems Associates Pvt Ltd., Bangalore delivered the seminar lectures.

Please contact universitysales@embeddedindia.com to conduct a similar ½ day FDP/ Seminar in your college.

Intel® Parallel Studio XE 2018 Beta - Join Now

May 2017

We would like to invite you to participate in the Intel® Parallel Studio XE 2018 Beta program. In this beta test, you will gain early access to new features and analysis techniques. Try them out, tell us what you love and what to improve, so we can make our products better for you. 

Registration is easy. Complete the pre-beta survey, register, and download the beta software:

Intel® Parallel Studio XE 2018 Pre-Beta survey

For more details: Call 080-67648888, +91-9845055869 or write to: Intelsoftwaresales@embeddedindia.com